Digital prog o/p levels – PXI cards

40 MHz, Digital Waveform Generators

3U PXI card
40 MHz or 10 MHz maximum clock rates
-2.0V to +10V programmable levels, in 10 mV steps
Every 4 channels, can have different output levels
ECL, PECL, TTL, LVDS, LVTTL, CMOS or LVCMOS
All outputs can be individually disabled (Tristate)
Hardware controlled differential output possibility (8-bit and 16 bit)
Triggers: start, stop, external
Up to 1024 Mbit (128 MB) of onboard signal memory
8-bit output mode can be used to save memory
FIFO mode, up to 100 MB/s data transfer with PC
Multi-card synchronization

There are four high-speed digital pattern generator cards in the UX7200 range. Different cards have either 40 MHz or 10 MHz max clock rates, and the choice of 16 or 32 channels.

The UX7200 are designed for versatile digital waveform generation. All have the ability to output digital signals with a wide range of output levels. Each 4 bits can be independently programmed with different output levels for compatibility with different i.c. logic families, including: ECL, PECL, TTL, LVDS, LVTTL, CMOS or LVCMOS.

The standard board with 16 MB onboard memory can be expanded to a maximum of 128 MB (1024 Mbit).

Table 1: Maximum I/O rates	Select Show

The cards are mainly used for digital recording or test pattern generation with a Device Under Test (DUT) in the electronics or semiconductor industry.

Software

• Free SBench 5.x measurement / generation program
• Free software drivers for Windows XP/2000/NT, 98 and Linux
• Free source code example for c/c++, VB, Delphi
• Optional drivers for MATLAB, LabView, DASYLab, Agilent-VEE