| There are 8 different 14-bit Arbitrary Waveform Generator cPCI 6U size cards in the UC.6000 range. The cards are available with 1, 2 or 4 output channels and either 20 MS/s, 60 MS/s or 125 MS/s maximum channel output rates. Each channel can be independently set for offset, amplitude or filter.
A Bank-Switch mode is provided that allows the generated signal to be swapped between two signals stored in the onboard memory, on receipt of an external TTL signal.
With up to 512 MB onboard memory (256 MSamples), even the fastest signals can be generated for a long time. At slower speeds, the FIFO mode can be used to output longer signals with data transfer direct from the PC memory or hard disk.
Boards
| P/N |
Maximum output rates |
| 1 channel |
2 channels |
4 channels |
| UC.6011 |
20 MS/s |
20 MS/s |
- |
| UC.6012 |
20 MS/s |
20 MS/s |
20 MS/s |
| UC.6021 |
60 MS/s |
60 MS/s |
- |
| UC.6022 |
60 MS/s |
60 MS/s |
60 MS/s |
| UC.6030 |
125 MS/s |
- |
- |
| UC.6031 |
125 MS/s |
125 MS/s |
- |
| UC.6033 |
125 MS/s |
60 MS/s |
- |
| UC.6034 |
125 MS/s |
125 MS/s |
60 MS/s |
|
Software
• Free SBench 5.x waveform generation software
• Free software drivers for Windows XP/2000/NT, 98 and Linux
• Free source code example for c/c++, VB, Delphi
• Optional drivers for MATLAB, LabView, DASYLab, Agilent-VEE
Board options
• Cascaded Synchronization
• Star Hub Synchronization
• Multiple Recording
• Gated Sampling
• Time Stamp
• Extra I/O TTL and Analog out
• High-speed digital output
UC6000 Amplifier Cards
Customers who require +/-10V output levels can now use the optional UC6000 Amplifier cards. These 3U cPCI cards have 1 to 4 amplifier channels with a fixed amplification. Each channel can deliver +/-10 V in high impedance or +/-5 V in 50 ohm termination. The amplifier card has a bandwidth of 30 MHz.
• UC6000-1Amp (1 channel)
• UC6000-2Amp (2 channels)
• UC6000-4Amp (4 channels)
| 
