14-bit, Arbitrary Waveform Generators
20 MS/s, 60 MS/s or 125 MS/s
- 3U PXI card
- Up to 3 Vpp into 50 Ohm load
- 1 or 2 independent and synchronized output channels
- Offset and amplitude programable
- 3 software selectable reconstruction filters
- Bank-switching mode
- 1 kS/s to maximum output rate, each channel
- Up to 128 MB of onboard signal memory
- FIFO mode, up to 100 MB/s data transfer to PC
- Multi-card synchronization
There are four 14-bit Arbitrary Waveform Generator PXI cards in the UX.6000 range. The cards are available with 1 or 2 output channels and either 20 MS/s, 60 MS/s or 125 MS/s maximum channel output rates. Each channel can be independently set for offset, amplitude or filter.A Bank-Switch mode is provided that allows the generated signal to be swapped between two signals stored in the onboard memory, on receipt of an external TTL signal.With up to 128 MB onboard memory (64 MSamples), even the fastest signals can be generated for a long time. At slower speeds, the FIFO mode can be used to output longer signals with data transfer direct from the PC memory or hard disk.
Software
• Free SBench 5.x waveform generation program
• Free software drivers for Windows XP/2000/NT, 98 and Linux
• Free source code example for c/c++, VB, Delphi
• Optional drivers for MATLAB, LabView, DASYLab, Agilent-VEE
Board options
• Multiple Replay
• Gated Sampling
UX6000 Amplifier Cards
Customers who require +/-10V output levels can now use the optional UX6000 Amplifier cards. These 3U PXI cards have 1 to 4 amplifier channels with a fixed amplification. Each channel can deliver +/-10 V in high impedance or +/-5 V in 50 ohm termination. The amplifier card has a bandwidth of 30 MHz.
• UX6000-1Amp (1 channel)
• UX6000-2Amp (2 channels)
• UX6000-4Amp (4 channels)
